 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HIGH-REPETITION PICOSECOND LIGHT PULSER Model PLP-10 New High repetition up to 100 MHz from Hamamatsu Wavelength range from 375 to 1,550 nm The picosecond light pulser PLP-10 is an ultrashort pulsed light source that utilizes a laser diode (LD) head. It consists of a controller and an LD head. Ten LD head types are available to accommodate various wavelengths, enabling optical output over a broad wavelength range of 375 to 1,550 nm. The PLP-10 is ideal for frequency characteristics evaluation of POF optical communications, response characteristics evaluation of a photodetector device, and an excitation light source of a fluorescence lifetime measurement system. Optical output is selectable from a window output or FC connector output. FEATURES q Ultrashort pulses with FWHM of 100 ps or less q High-repetition frequency up to 100 MHz q Stable output power and oscillation timing q Easy to use and maintenance free operation q Built-in trigger delay q LED heads (optonal) q APPLICATIONS q Frequency characteristics evaluation of POF and Gigabit Ethernet optical fiber q Pulse response measurement of high-speed photodetectors q Record evaluation of an optical recording medium q Excitation light source for fluorescence lifetime measurements Please consult with our sales office. SPECIFICATIONS q M8903 Laser diode head * Output form type: window: PLP10-xxx / FC connector (for multi-mode optical fiber) : PLP10-xxxC Parameter Emission wavelength Wavelength tolerance Spectral half-width Pulse width Beam divergence angle* Window output FC connector output max. typ. || typ . min. typ . min. Unit nm nm nm ps deg. PLP10-038 PLP10-041 PLP10-044 PLP10-063 PLP10-065 PLP10-067 PLP10-078 PLP10-085 PLP10-130 PLP10-155 PLP10-041C PLP10-044C PLP10-063C PLP10-065C PLP10-067C PLP10-078C PLP10-085C PLP10-130C PLP10-155C ****** 405 635 650 670 780 850 375 440 1300 1550 <10 <10 <10 <20 <10 <10 <10 <10 <30 <30 <10 <5 <5 <5 <5 <5 <10 <10 <10 <20 100 110 100 100 100 100 100 100 100 100 70 90 80 80 70 70 70 70 70 70 11 16 15 12 15 13 10 10 25 25 34 35 35 40 30 32 30 28 30 30 100 70 70 70 70 100 70 80 20 10 50 30 30 30 30 50 30 40 10 5 50 30 30 30 30 50 20 10 5 *** 25 10 10 10 10 25 10 5 2 *** Peak power mW *Measured using a window output type. Note: Measured with 100MHz. The values can be changed depending on the frequency. The PLP head should be selected according to wavelength and output form and can be exchangeable with the controller C8898. q C8898 Controller * Repetition frequency (Hz) Internal trigger ....... 100 MHz, 50 MHz, 20 MHz, 10 MHZ, 5 MHz, 2 MHz, 1 MHz, 500 kHz, 200 kHz, 100 kHz, 50 kHz, 20 kHz, 10 kHz, 5 kHz, 2 kHz, 1 kHz, 500 Hz, 200 Hz, 100 Hz, 50 Hz, 20 Hz, 10 Hz, 5 Hz, 2 Hz External trigger ......................................... Single shot to 50 MHz * External trigger output Amplitude ........................................................... -4 to +4 V/50 Minimum pulse width ........................................................... 10 ns * Synchronous trigger output Amplitude (Selectable) ..................................... +2 to +3 V / 50 or -500 to 700 mV / 50 Pulse width ................................................................. 5 ns 3 ns Timing ........................ before or after optical output (selectable) Delay time .... t0 (reference time) t; t= 0 ns, 20 ns, 40 ns, 60 ns 80 ns 100 ns * Line voltage ......................................... 100 to 240 V AC 50/60 Hz * Power consumption .............................................................. 90 VA q Common specifications * Ambient operating temperature ................................ +10 to +30C * Ambient storage temperature ................................... -10 to +50C * Ambient operating/storage humidity ... 70% or less (non-condensing) LASER SAFETY Conforming to international laser safety standards (USA:21 CFR 1040.10 CDRH, other areas: IEC Pub.825), which obligate manufacturers to provide preventive safety measures, Hamamatsu lasers are classified, and appropriate safety measures and labeling are provided. Duaring operation, users must also use their preventive safety measures according to laserrelated regulations. q Labels Hamamatsu model PLP-10 uses lasers to be classified, Class 3B. DIMENSIONAL OUTLINES (Unit: mm) q M8903 Laser diode head (approx. 0.5 kg) Description Label (Sample) Caution Label q C8898 Controller (approx. 5.1 kg) OPERATION FREQUENCY (Hz) EXT.TRIG. LEVEL 800K 8M 80M OPTICAL OUTPUT SYNC.DELAY (ns) X1/5 INTERNAL TRIGGER 80K 8K 800 80 8 X1 X1/2 EMISSION POWER HEAD DRIVE EXT. 18.1 86 117.4 9.4+2 0 14.7 86 114 EXT. TRIG. (50) SYNC. OUT. (50) 170 2 28 28 33 33 232 1 6 2 98.5 1 POWER ADJUST. READY 28 2 255 2 304.2 1 40 60 40 60 - Window output type - - FC connector output type ISO 9001 Certificate: 09 105 79045 5 Product and software package names noted in this documentation are trademarks or registered trademarks of their respective manufacturers. q q Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. . Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications and external appearance are subject to change without notice. . (c) 2003 Hamamatsu Photonics K.K. Homepage Address http://www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Systems Division 812 Joko-cho, Hamamatsu City, 431-3196, Japan, Telephone: (81)53-431-0124, Fax: (81)53-435-1574, E-mail:export@sys.hpk.co.jp U.S.A. and Canada: Hamamatsu Photonic Systems: 360 Foothill Road, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1)908-231-1116, Fax: (1)908-231-0852, E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658, E-mail: info@hamamatsu.de , France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10, E-mail: infos@hamamatsu.fr United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire, AL7 1BW, U.K., Telephone: (44) 1707-294888, Fax: (44) 1707-325777, E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Smidesvagen 12, SE-171-41 Solna, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01, E-mail: info@hamamatsu.se Cat. No. SSCS1055E02 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Mois, 1/E 20020 Arese (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741, E-mail: info@hamamatsu.it AUG/2003 HPK Created in Japan (PDF) |
Price & Availability of PLP10-155C
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |